Distribution Transformer Manufacturer

Product Details:

We are engaged in manufacturing Power Distribution Transformer to meet the present-day needs of effective power distribution in various establishments. We have installed facility to manufacture Oil-filled Power and Distribution Transformers up to 10 MVA, 66 KV Class. The tested range of Power Distribution Transformers can also be customized to meet the requirements of individual, Industrial, commercial, co-generation and utility services. The Power Distribution Transformers can be provided with a variety of terminations to meet individual requirements for new installation, replacement etc.
Applications :

• Industrial Purpose
• Electricity Board
• Domestic and Consumer Transformers
• Wind Mill Power transmission

Standard Fitting :

• Monogram plate.
• Rating & diagram plate .
• Earthing terminals – 2 Nos.
• Lifting lugs for complete transformer.
• Thermometer pocket.
• Air release hole with plug.
• Oil filling hole with plug on conservator.
• Oil conservator with drain plug.
• Dehydrating breather (1 No.) sillicagel type with oil seal & connecting pipe.
• Prismatic oil level indicator – 1 No.
• Drain valve with plug – 1 No.
• Drain cum bottom filter valve with plug.
• Inspection cover.
• Externally operated off circuit tap changing switch.
• Jacking lugs.
• Under base with flat bi-directional treaded rollers.
• Radiators.
• Pressure relief valve without electrical contacts.
• Filter valve with plug.
• Sampling valve.
• LV additional neutral- out door bushing – 1 No.
• H.V.TERMINALS – BARE BUSHING.
• L.V.TERMINALS – CABLE BOX.
• Buchholz relay.
• Magnetic oil level gauge with low oil level alarm contacts
• Oil temperature indicator with electrical contacts for alarm and trip .
• Winding temperature indicator with electrical contacts for alarm and trip.
• Marshaling box.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 4-6
• Packaging Details: WOODEN

Product Details:

CAPACITY                  100 KVA  -   5000   KVA, 3-PH., 50/60Hz.

Variable STEPLESSLY by means of Motorized On load Linear Type Regulator.

Efficiency                     More than 99%

Waveform / Harmonic NIL

Duty Cycle                   Industrial Heavy duty in construction, suitable for 100% continuous duty cycle

Electronic Control Circuit      MICROPROCESSOR BASED CONTROLLER.

Ip Level                        IP44 

Response Time             Response time 1 cycle

Humidity                      The unit shall operate with relative humidity of 0-90%

Panel Indication           LED type indicators for   R – Y – B – LOW CUT OFF – HIGH CUT OFF.

Digital Metering           Meters for Input/ Output Voltage and Output Current.

Controls                        AUTO/ MANUAL (Raise – Lower ) / T – HANDLE.

Class Of Insulation       Up to Class H

Regulator Type             Differential Wound ± Type Linear Regulator

Carbon Contacts           Self Lubricating Carbon Roller Assemblies instead of ordinary carbon brushes which offers more reliability and trouble-free performance.

Winding                        Copper strip

No Load Current          Less than 1% of full load current.

Operating Temperature -10° c to 60°c.

Nature Of Cooling       Dry Type/Air Cooled

Protections                   Under/Over Voltage, Phase Failure Indications

Load Power Factor       P.F. as per load.

Mounting Status           uni - directional wheels

Rate Of Correction       10 volts to 25 volts per sec. OR as per your requirement.

Noise Attenuation        Common Mode Noise Attenuation: 140dB

Sound Level                 Sound level at 1meter to not exceed 65dB

Withstand Capacity      Withstand Overload: 200% for 10 seconds, 1000% for 1 sec.

Additional Information:

• Production Capacity: 100
• Delivery Time: 4 WEEKS
• Packaging Details: WOODEN PACK

Product Details:

pec is an iso 9001:2015, nsic-crisil, dun bradstreet, msme, eepc & exim registered company. Manufacture all type of transformers & automatic voltage stabilizer for industrial applications.

automatic voltage controller

(automatic voltage regulator, servo voltage stabilizer) up to 7000 kva

power distribution transformer up to 10 mva.

d. C. Supply, rectifier transformer for electroplating, electro chemical, electrolysis, anodizing up to 25,000 amps

ultra isolation transformer up to 7000 kva

cast resin transformer (dry transformer) up to 7000 kva

variable voltage transformer / regulator up to 7000 kva

Additional Information:

• Production Capacity: 1000
• Delivery Time: 4-6 weeks